Hi everybody!
We have a HP C7000 Encolosure with 4 BL460c Gen 8 blades in the front size of it. In back size of the C7000 we have 2 SAN Switch, 2 HP BLc GbE2c Layer 2/3 Switch and 2 Onboard Administrator Module.
Everything is work fine with IP Addresses like this:
Active OA:
IP Address: 172.16.0.253
Stanby OA:
IP Address: 172.16.0.254
BL460c blade server on Bay 1:
iLO IP Address: 172.16.0.10
BL460c blade server on Bay 2:
iLO IP Address: 172.16.0.11
BL460c blade server on Bay 9:
iLO IP Address: 172.16.0.19
BL460c blade server on Bay 10:
iLO IP Address: 172.16.0.20
We can ping from pc which connected to iLO port on Onboard Administrator (OA) to that IP Addresses above. (can i call it MANAGE PC?)
Continue, We access OA through Web https://172.16.0.253, then use Intergrated Console to control 4 blade servers. We mounted ESXi 5.1 U1 image and installed it on 4 blade servers successfully.
We manually config the IP Address on each ESXi server (like this):
BL460c blade server on Bay 1 as ESXi server 1:
IP Address: 10.0.0.11
BL460c blade server on Bay 2 as ESXi server 2:
IP Address: 10.0.0.12
BL460c blade server on Bay 9 as ESXi server 9:
IP Address: 10.0.0.19
BL460c blade server on Bay 10 as ESXi server 10:
IP Address: 10.0.0.20
Now, we can ping from ESXi server 1 to other ESXi server. I want to say 4 blade server can ping together.
BUT:
- we can't ping that blade servers from MANAGE PC (that PC connect to iLO port on OA. In this scene, MANAGE PC has IP Address 172.16.0.100/16)
- we unplug network cable from iLO port then plug it to port number 24 on HP BLc GbE2c LY 2/3 Switch, then set IP Address of MANAGE PC to 10.0.0.100/24. Still the same, can't access that servers
Anybody can explain me how to access that server (ping, http etc...). Do we have to config the HP BLc GbE2c LY 2/3 Switch? We read many many guide on HP website but they didn't mentioned about Routing or Switch configure
Thanks in advance!