Hello,
Using VM Fusion 5
I reviewed a number of the posts and knowledgebase articles related to setting up static IP, but I'm still running into something. I have one VM that I want to use static IP for and for my others, dynamically assigned IP is fine. So, I added my static IP to dhcpd.conf (below is my config). After adding my host and restarting VMFusion, my host has static IP, that works great. However, networking does not work for any of my hosts with Dynamic IP's. I tried removing Network Adaptor & re-addind, etc. DHCP does not work.
Also, if I comment out MYWIN2K01, I have to reboot my Mac in order for DHCP to start working for those hosts. Am I missing something? I can have both static & dynamic IP's, correct? My hosts using DHCP are Centos.
Mike
host MYWIN2K01 {
hardware ethernet 00:0C:29:EB:F5:3A;
fixed-address 172.16.210.64;
}
###### VMNET DHCP Configuration. Start of "DO NOT MODIFY SECTION" #####
# Modification Instructions: This section of the configuration file contains
# information generated by the configuration program. Do not modify this
# section.
# You are free to modify everything else. Also, this section must start
# on a new line
# This file will get backed up with a different name in the same directory
# if this section is edited and you try to configure DHCP again.
# Written at: 03/15/2013 12:07:34
allow unknown-clients;
default-lease-time 1800; # default is 30 minutes
max-lease-time 7200; # default is 2 hours
subnet 172.16.210.0 netmask 255.255.255.0 {
range 172.16.210.128 172.16.210.254;
option broadcast-address 172.16.210.255;
option domain-name-servers 172.16.210.2;
option domain-name localdomain;
default-lease-time 1800; # default is 30 minutes
max-lease-time 7200; # default is 2 hours
option netbios-name-servers 172.16.210.2;
option routers 172.16.210.2;
}
host vmnet8 {
hardware ethernet 00:50:56:C0:00:08;
fixed-address 172.16.210.1;
option domain-name-servers 0.0.0.0;
option domain-name "";
option routers 0.0.0.0;
}