Hi,
The default DHCP Settings in my TP-Link Router as
DHCP Server: Enable
Start IP Address: 192.168.0.100
End IP Address: 192.168.0.199
Lease Time: 120 minutes (1~2880 minutes, the default value is 120)
Default Gateway: 192.168.0.1 (optional)
Default Domain: (optional)
DNS Server: 0.0.0.0 (optional)
Secondary DNS Server: 0.0.0.0 (optional)
I have max 5 devices connected with internet access so if I change it as
Start IP Address: 192.168.0.100
End IP Address: 192.168.0.105
I believe there will not be any issue.
As Guest OS, I created Windows Server 2016 and Windows 10 in VMware Workstation. Currently network connection type of both is NAT.
I have to assign static IP in Windows Server 2016 so that it can be promoted as a Domain Controller. I have to configure DHCP in Windows Server 2016 so that Windows 10 can get IP from Windows Server 2016. Moreover, there should internet access in all Guest OS.
If I assign Static IP between 192.168.0.106 and 192.168.0.199, pick IPs between 192.168.0.106 and 192.168.0.199 for DHCP range for Windows Server 2016 and default gateway as 192.168.0.1 in all Guest OS, will that be fine without any issue?
Pls advise me.
Regards
EinfoMail